Technical Parameters: 
　　1,Applicable polyester monofilament: 0.10～0.5mm or 0.2mmx6 strands
　　2,Weft density range: 50～360 weft /10cm.Warp density range: 60～180 weft /10cm.
　　3,Denting breadth∶16m.
　　4,Economic speed∶25 rev/min
　　5,Total motor power∶40.75KW.
　　6,Machine weight∶about 80T.
　　7,Overall dimensions∶Width23520×Depth6485×Height2600(mm).
Machine structure:   
　　1,Rack: Main wall panels in cast iron box type structure to combine the whole machine, in a gap 1780mm
　　　　between two sets.
　　2,Main driving: Dual-motor double-side coaxial drive, 11kw for each motor; dual pneumatic clutch,
　　　　elliptical gear transmission for main transmission case.
　　3,Weft Insertion: Hydraulic shooting-in, 2*2 shuttle box change or weft section mechanism at two sides.
　　4,Shedding: Large blade type side pull dobby at two sides, 16-pcs heald frame.
　　5,Beating-up: Multi-section assembled crankshaft four-bar linkage for beating-up at variable speed, a set
　　　　of cradle mechanism outside. 
　　6,Take-up: Three-roller active take-up under electronic control, with upper roll and lower roller driven by
　　　　servomotor.
　　7,Temple mechanism: Ring temple plus side weft control device, ring weaving temple plus side weft
　　　　control device. 
　　8,Warp let-off: Active let-off (by single warp beams, or beaming in reels) under electronic control.
　　9,Winding: External surface take-up driven by independent torque motor.
　　10,Lubrication System: Combined automatic or manual feed of grease lubrication.
　　11,Control system: Computer control system is available for free setting of parameters and automatic
　　　　display of faults.